3D Printing News Briefs, April 20, 2022: Funding, Spare Parts, & More
French DARPA to Drive Automated 2D-to-3D 3D Printing Software
The Top 10 3D Printing Venture Capital Funds and Investors
Metals Market Data: Q4 & Annual 2021
Polymers Market Data: Q4 & Annual 2021
Market for Bound Metal Additive Manufacturing 2022
Market for Bound Metal Additive Manufacturing 2022
The Market for Additive Manufactured Polymer Automotive Parts: Europe and North America Regions
DED and Large-Format Additive Manufacturing Markets: 2021-2030
3D Printed Metals: A Patent Landscape Analysis 2019
3d Printed Polymers: A Patent Landscape Analysis – 2016
3d-printed Metals: A Patent Landscape Analysis – 2016
Metal Parts Produced 2021: Additive Manufacturing Applications Market Analysis
Additive Manufacturing with Metal Powders 2020
Copper Additive Manufacturing 2020–Market Database and Outlook
Surface Finish Study by Fraunhofer IAPT
Additive Monitoring Study by Fraunhofer IAPT
Additive Fatigue Study by Fraunhofer IAPT
A curated collection of industry and product deep-dives.
Videos, podcasts, product reviews and free downloadable resources.
Powerful search with product databases and business directories.
Dig Deeper, Search Our Message Board 3dprintboard.com
Lead Materials and Processing Engineer
Feature Your Job Posting Here
3D Printing News Briefs, April 20, 2022: Funding, Spare Parts, & More
French DARPA to Drive Automated 2D-to-3D 3D Printing Software
The Top 10 3D Printing Venture Capital Funds and Investors
3D Printing News Briefs, April 20, 2022: Funding, Spare Parts, & More
French DARPA to Drive Automated 2D-to-3D 3D Printing Software
The Top 10 3D Printing Venture Capital Funds and Investors
Let’s say you have a cool digital sculpture that you’d like to print into a figurine…no problem, that’s not difficult. But here’s where it can get tricky – what if you’re looking for a material with a little more pizzazz than plastic? Formlabs has published a tutorial on how to make full metal miniatures using 3D printed pewter casting molds. Metal offers a smooth surface that’s difficult to match, and pewter, a metal alloy composed of mainly tin, is extremely malleable, with a low melting point of around 170° to 230°C. The direct pewter casting process offers much better detail and surface finish than directly 3D printing metal, for a lower cost, and 3D printing a mold preserves detail, while saving on time and money – if there’s a problem with the casting, just melt your model down and re-use the metal.
To get started, you’ll need a Form 2 3D printer and Formlabs’ High Temp Resin, along with CAD software, Autodesk Meshmixer, and a cure chamber, like Form Cure. You’ll also need a 3D model, either STL or OBJ, though Formlabs notes that if you’re using a solid model from Rhino or SolidWorks, the workflow will be a little different. Formlabs worked with Hero Forge to make a mini figure from its online customizer for this tutorial.
“Most models will be castable at some scale,” Formlabs writes. “The thinnest part of the model should be at least 1.5 mm, and around 15 mm at the thickest. If features are too thin, the metal part will be too fragile. If features are too thick, the casting won’t develop a smooth surface due to shrinkage. Small features under 1.5 mm are fine.”
In a sacrificial shell, the detailed model is on the inside of a thin mold.
Most models are not designed to be moldable, but you can make almost any metal object with a shell mold that’s designed to be broken off later. When preparing the mold design, you can either use a sacrificial mold or a pull-apart mold. If you go with the first option, make a shell using editing software, like Maya or Blender, or in Meshmixer; you can also make a shell mold from an STL. Make sure that light can reach the mold’s interior for the post-curing process – Formlabs split their mold in half to ensure easier post-curing, then glued and clamped it together again before pouring the pewter in.
“For larger models (2 – 10 cm in tall), making a uniform shell will save a lot of resin, print time, and money. If you are making a shell, it should be uniformly 3 mm thick to withstand the shrinkage and expansion forces from the molten pewter,” Formlabs writes. “For small models (1 – 2 cm tall), designing a uniform thickness shell may not be worth the effort. Simply subtracting your model from a rectangular volume can save design time.”
Two-sided mold printed without supports on the inside, in PreForm and as printed.
A conventionally designed two-sided pull-apart mold can be reused, but it does limit your design. However, no matter which type of mold you go with, you definitely need to remember to add in air vents, because when metal flows down, the air bubbles up. By making sure there are enough air vents, you’ll improve how well your model fills with pewter, so when your model is oriented in the way it will be filled, add vents where there are isolated high points in the model.
In PreForm, try to orient your model so it doesn’t need internal supports – you can simply point the cavity up for a two-sided, pull-apart mold. If you have a shell, you’ll need to search for an optimal orientation.
Point the cavity of your pull-part mold upwards in PreForm.
According to Formlabs, “Splitting the shell in half for gluing later is very helpful if you are having trouble finding an orientation that doesn’t require unremovable supports, and also enables uniform post-curing for the interior of the mold.”
Then 3D print the model using High Temp Resin, which must be fully post-cured for it to hit the required thermal properties – you’ll see your print transition to orange as it cures. You can use Form Cure, heat, or even a UV nail spa, though this last option takes several hours. You’ll need to make sure all of the parts are washed and fully dried before you use them, as moisture will reduce the surface quality of the casting by causing air bubbles. Formlabs suggests dusting your mold’s cavity with graphite powder lubricant, which helps it release more easily.
You have to be very careful that none of your skin is exposed when casting pewter, in case it splashes; also, be sure that you’re casting outdoors, or in a well-ventilated space. Fix your mold in a clamp or a vise, or even partially embed it in a bucket of sand, so long as the air vents aren’t blocked. Formlabs used Alloy R98 from Rotometals, though there are many different pewter alloys available, and melted its pewter ingot on a frying pan, used only for this specific purpose, on a portable stove outside.
Make sure the pewter is at the right temperature before pouring. You can test this with a piece of dry wood – if the wood starts to smoke, then the pewter is too hot and you should not pour yet. The pewter will form an oxide layer on top of the puddle as it melts, which you should scrape off with a spoon before slowly pouring the pewter into the mold with one continuous pour. Once the part has completely cooled, you can demold the part; if you used a sacrificial shell mold, you can use a small screwdriver to carefully chisel the shell away from the model.
Ta-da – now you have your own pewter figurine! The soft alloy can be polished or buffed by hand, or using a rotary tool for a high gloss finish. You can also electroplate it using precious metals, or plate it with nickel to achieve high mechanical strength. Discuss in the Pewter Molds forum at 3DPB.com.
Stay up-to-date on all the latest news from the 3D printing industry and recieve information and offers from thrid party vendors.
3D Printing News Briefs, April 20, 2022: Funding, Spare Parts, & More
French DARPA to Drive Automated 2D-to-3D 3D Printing Software
The 3D printing sector has obviously gone through a drastic evolution in the past several years. Nevertheless, there’s still ample reason to believe that neither the technology nor the industry...
Stratasys and Velo3D are both continuing their 3D printing tours for this week’s webinar and event roundup. There will also be a Space Showcase, a course on metal powder bed...
We’re starting with business in today’s 3D Printing News Briefs, as Mantle recently announced three collaborations, Stratasys is strengthening its infrastructure in France with a partnership and e-store, and the...
Precious metals science leader Legor Group SPA, which produces powders, alloys, and plating solutions, has entered into a strategic collaboration with HP. Legor serves the fashion accessory and jewelry sectors,...
Upload your 3D Models and get them printed quickly and efficiently.
Networking & Intelligence Summit, February 7-9, 2023
3D Printing jobs around the world.
Subscribe to Our Email Newsletter
© 2016 - 2022 3DR HOLDINGS. ALL RIGHTS RESERVED.
Register to view and download proprietary industry data from SmarTech and 3DPrint.com Questions? Contact [email protected]