Call 888-776-0942 from 8 a.m. to 10 p.m. Eastern Time

Dublin, July 12, 2021/PRNewswire/-ResearchAndMarkets.com has added the "Gasket and Seals Market: Global Industry Trends, Share, Scale, Growth, Opportunities and Forecasts 2021-2026" report to the products.

In 2020, the global gasket and seals market value will reach 57.2 billion U.S. dollars. Looking ahead, publishers expect this market to show moderate growth between 2021-2026. Keeping in mind the uncertainty of COVID-19, we are constantly tracking and evaluating the direct and indirect impact of the pandemic on different end-use industries. These insights are included in the report as major market contributors. Gaskets and seals are mechanical fixing devices used to prevent fluid leakage between two components and entry of debris in the engine. The gasket acts as a static seal between two immovable flat flanges. They are made of materials that can withstand high compression rates, such as rubber, nitrite, graphite, and neoprene. On the other hand, the seal is placed to prevent leakage of two moving parts (such as shafts, pumps, and engine parts). They are usually flat and round, made of an inner rubber surface and an outer metal ring. They are mainly used to seal hydraulic lines to prevent shaft end leakage. Both gaskets and seals have high flexibility, reliability, strength and heat resistance. The booming automotive industry, as well as the increased utilization of products in the pipeline and construction industries, are key factors driving market growth. Due to the acceleration of global industrialization and urbanization, the number of manufacturing plants and factories using gaskets and seals has increased significantly. These products are widely used in the automotive industry to avoid leakage or spillage of liquids and gases. In addition, gaskets are used in engines to maintain pressure and prevent penetration of contaminated particles, while seals are used as shock absorbers. They can also withstand extreme pressure, compressive loads and temperature changes, so they are used in various sealing machines and equipment in the manufacturing sector. In addition, the growth of e-commerce platforms that provide manufacturers with direct and third-party operating distribution channels has also contributed to market growth.

The report also analyzes the competitive landscape of the market. Some of the major players include AB SKF, Dana Incorporated, ElringKlinger, Flowserve, Trelleborg, Freudenberg Sealing Technologies, Federal-Mogul, Smiths Group, BRUSS Sealing Systems, Cooper Standard Holding, Garlock Sealing Technologies , Daetwyler Holding and other key questions answered in this report:

Key topics covered: 1 Foreword 2 Scope and methodology 3 Executive summary 4 Introduction 4.1 Overview 4.2 Key industry trends 5 Global gasket and seals market 5.1 Market overview 5.2 Market performance 5.3 Impact of COVID-19 5.4 Market segmentation by product 5.5 Market Segmentation by Material 5.6 Market Segmentation by Application 5.7 Market Segmentation by End Use 5.8 Market Segmentation by Region 5.9 Market Forecast 6 Market Segmentation by Product 6.1 Gasket 6.1.1 Market Trend 6.1.2 Breakdown by Type By market 6.1.2.1 Metal gaskets 6.1.2.2. Rubber gaskets 6 2.3 Cork gaskets 6.1.2.4 Non-asbestos gaskets 6.1.2.5 Spiral wound gaskets 6.1.2.6 Other 6.1.3 Market forecast 6.2 Seals 6.2.1 Market trend 6.2.2 Market Segmentation by Type 6.2.2.6. Molded Shaft Seals 2.2.6.2.3 Automobile Body Seals 6.2.2.4 Other 6.2.3 Market Forecast 7 Market Segmentation by Material 7.1 Fiber 7.1. 1 Market trend 7.1.2 Market forecast 7.2 Graphite 7.2.1 Market trend 7.2.2 Market forecast 7.3 PTFE market 7.3 Trend 7.3.2 Market outlook cast 7.4 Rubber 7.4.1 Market trend 7.4.2 Market forecast 7.5 Silicone 7.5.1 Market Trend 7.5.2 Market Forecast 7.6 Other 7.6.1 Market Trends 7.6.2 Market Forecast 8 Market Segmentation by Application 8.1 Automotive 8.18.1 Market Trend. 2 Market Forecast 8.2 Industrial Machinery 8.2.1 Market Trend 8.2.2 Market Forecast 8.3 Electrical And Electronics 8.3.1 Market Trends 8.3.2 Market Forecasts 8.4 Ships and Railways 8.4.1 Market Trends 8.4.2 Market Forecasts 8.5 Aerospace 8.5.1 Market Trends 8.5.2 Market Forecasts 8.6 Oil and Gas 8.6.1 Market Trends 8.6. 2 Market forecast 8.7 Chemical and petrochemical 8.7.1 Market trend 8.7.2 Market forecast 8.8 Other 8.8.1 Market trend 8.8.2 Market forecast 9 Market segmentation by end use 9.1 OEM 9.1.1 Market trend 9.1.2 Market forecast 9.2 After-sales Market 9.2.1 Market trends 9.2.2 Market forecasts 10 Market segmentation by region 10.1 Asia Pacific 10.1.1 Market trends 10.1.2 Market forecasts 10.22 Europe 1 Market trends 10.2.2 Market forecasts 10.3 North America 10.3.1 Market trends 10.3 .2 Market forecast 10.4 Middle East and Africa 10.4.1 Market trend 10.4.2 Market forecast 10.5 Latin America 10.5.1 Market trend 10.5.2 Market forecast 11 SWOT analysis

12 Value chain analysis 13 Porter's five forces analysis 14 Competitive landscape 14.1 Market structure 14.2 Main players 14.3 Introduction to main players 14.3.1 AB SKF 14.3.2 Dana Incorporated 14.3.3 ElringKlinger 14.3.3.365 Fredenberg Sealellorg 14.35 Flowserve Technology 14.3 .7 Federal-Mogul 14.3.8 Smiths Group 14.3.9 BRUSS Sealing Systems 14.3.10 Cooper Standard Holding 14.3.11 Garlock Sealing Technologies 14.3.12 Daetwyler Holding

For more information about this report, please visit https://www.researchandmarkets.com/r/ht2v7v

Research and Marketing Laura Wood, Senior Manager [email protected] Call 1-917-300-0470 during US Eastern Time Office Hours, US/Canada Toll Free 1-800-526-8630 GMT Office Hours, Call 353-1-416-8900 US Fax: 646-607-1904 Fax (Outside the US): 353-1-481-1716

More news releases on similar topics

Cision Distribution 888-776-0942 8 a.m. to 9 p.m. Eastern Time