We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
A paper recently published in the journal Materials reviewed the recent developments in graphene-based flexible photodetectors (PDs).
Study: Recent Progress on Graphene Flexible Photodetectors. Image Credit: Visual Generation/Shutterstock.com
PDs are one of the common optoelectronic devices used extensively in several applications. Functional materials typically used in traditional PDs demonstrate high rigidity, which significantly affects the performance of PDs upon bending or stretching.
Thus, the development of new flexible PDs with foldable and bendable functions has received considerable attention, specifically for the fabrication of implantable, wearable optoelectronic devices.
Graphene with exceptional optical and electrical performance deposited on different rigid and flexible substrates as a transparent conductive film has displayed significant potential in PDs. In recent years, several studies were performed to enhance the performance of graphene-based PDs, with a number of them focusing on improving the performance of the graphene conductive films, as these films critically influence the overall performance of the device.
In this study, researchers reviewed the recent developments in graphene-based conductive films for photodetection, all-graphene flexible PDs, and high-performance graphene-hybrid PDs, and discussed the future applications of PDs in flexible wearable electronics.
Bandgap values of various 2D materials and their corresponding detection ranges. Detection range and properties of two-dimensional material graphene. Image Credit: He, L et al., Materials
Graphene-based transparent conductive films used in photoelectric detection must be highly efficient and uniform without agglomeration on the substrate. Chemical vapor deposition (CVD) can be used as an effective technique for the fabrication of large-area graphene films.
Recently, a new CVD technique was developed for the synthesis of a large-area graphene film. The method was different from the traditional CVD processes that require temperatures above 1000 oC for the complete preparation of graphene.
High temperatures can result in the deposition of a large number of amorphous carbon contaminants on the graphene surface, leading to “intrinsic pollution” of the graphene film, which significantly affects the graphene performance.
In this new CVD method, polycarbonate and sapphire are used as substrates, while molten gallium is used as a catalyst. The high-temperature requirement of conventional graphene preparation methods can be eliminated using this method which requires 50 oC temperature to prepare graphene.
The transfer of prepared high-quality graphene to the target substrate that is suitable for PDs is essential to achieving large-scale production of graphene films. However, during the transfer process, several impurities are deposited on the graphene film surface, leading to surface contamination that adversely impacts the PD performance. Additionally, the transfer efficiency is reduced during the transfer process as graphene is prone to the formation of defects, folds, or wrinkles.
In the indirect transfer method, a carrier material is used as the supporting layer during the transfer of graphene from the growth substrate to the target substrate, and then the material is removed through chemical or physical methods.
Poly(methyl methacrylate) (PMMA) and polydimethylsiloxane (PDMS) are commonly used as the carrier. High-quality graphene can be obtained using the indirect transfer method through careful selection of the carrier and continued optimization of the transfer process.
In the direct transfer process, graphene is attached directly to the target substrate by peeling off the film from the growth substrate without requiring any carrier material. The graphene film damage rate is reduced significantly in the direct transfer method compared to indirect transfer as cracks are not introduced in the graphene during the degumming process.
However, the adhesion interlayer can adversely impact the graphene performance in the direct transfer process, which can be prevented by directly transferring graphene to the target substrate without using a polymer.
The first all-graphene PD was prepared using graphene as a light-absorbing layer. Subsequently, a metal-free low-temperature plasma-enhanced CVD method was used to prepare an all-graphene PD with a high detectivity and response rate in the visible range.
However, graphene has a limited external quantum efficiency (EQE) and light absorption capacity as it lacks a bandgap and absorbs the entire electromagnetic spectrum owing to its very low light absorption coefficient.
Heterostructure recombination, resonant cavity enhancement, and plasma enhancement can be used to improve the graphene PD performance. An integrated waveguide PD fabricated using metal-doped graphene demonstrated wide spectral bandwidth, high speed, and high responsiveness. The device responded uniformly under 1450 to 1590 nm illumination. Such graphene hybrid PDs based on heterogeneous recombination or doping display significantly improved specific detectivity and light responsivity.
Perovskite materials display superior light absorption characteristics. For instance, the cesium lead halide (CsPbX3) perovskite nanocrystal photoluminescence is characterized by 1–29 ns radiative lifetimes, high quantum yields of 90%, extensive color gamut that covers up to 140% of the National Television Standards Committee (NTSC) color standard, and narrow emission line widths.
Halide-type perovskite materials were specifically investigated as high-efficiency light-absorbing materials in optoelectronic devices due to their excellent optical properties. In a study, a flexible perovskite/graphene hybrid channel field-effect phototransistor structure was prepared and evaluated. The fabricated phototransistor displayed a highly sensitive and narrow light response over the visible spectrum.
Semiconductor C60, a type of low-dimensional carbon material, displays considerable absorption from the ultraviolet (UV) to the near-infrared (IR) regions. The medium bandgap C60 prevents the photoelectric detection of low noise and allows the suppression of dark current observed in graphene due to the lack of bandgap.
This carbon material can be used in several applications in low-cost flexible optoelectronic devices as it possesses exceptional mechanical and optoelectronic properties. Thus, the combination of graphene and C60 can overcome the drawbacks of all-graphene PDs, while the unique semiconductor characteristics of C60 can improve the performance of all-carbon flexible PDs.
Single-walled carbon nanotubes (SWCNTs) can also be used to fabricate high-performance all-carbon PDs due to their high mobility and an on/off ratio of 105. For instance, SWCNT-graphene heterostructure-based thin-film transistors can operate under 20% strain while displaying very high transparency and high mechanical strength.
Atomically thin vertical heterostructures displayed considerable potential in optoelectronic applications owing to their transparency and flexibility. Two-dimensional (2D) transition metal dichalcogenides (TMDs), specifically layered materials with weak out-of-plane bonding, strong in-plane bonding, exceptional photoelectric properties, and mechanical flexibility, are typically used to fabricate these heterostructures.
These layered materials with a narrow bandgap and high carrier mobility demonstrate robust light-matter interactions. Thus, the stacking of these 2D material crystals with extensive optical properties and graphene can facilitate the synthesis of high-performance optoelectronic devices.
Among the TMDs, molybdenum disulfide and tungsten disulfide were investigated extensively for applications in optoelectronic devices to fabricate graphene/transition metal halide heterostructure-based PDs as they display high chemical stability and have an energy gap in the visible region of the electromagnetic spectrum.
A flexible PD can be placed on the skin surface to form a wearable patch to monitor human health. Similarly, a photoelectric device composed of an ultrathin neural-interfacing electrode (UNE) and a curved image sensor (CurvIS) array was developed by imitating the structural characteristics of the human eye and using an anatomically thin molybdenum disulfide-graphene heterostructure softly implanted into the human eye retina.
The responsivity of the heterostructure device was substantially higher compared to silicon photodiodes of a similar thickness, which indicated its great potential for use in biomedical applications. Similarly, a new type of wearable paper-based PD was recently fabricated that can measure the dose and intensity of UV light simultaneously. Moreover, the photoelectric signal remained stable even after 1000 bends.
Graphene flexible PDs have significant development prospects in the Internet of Things and wearable devices as graphene can be used as both a light-absorbing layer and transparent conductive layer.
Moreover, graphene can be combined with different materials to improve the sensitivity of the resulting PD and extend its detection spectrum from UV to mid-IR bands. Graphene PDs can also be used for other sensing elements, such as biosensors or gas sensors, to realize multifunctional sensing.
However, more research is required to thoroughly study the charge transfer in heterojunctions and to improve the overall PD performance. Moreover, the cost and complexity issues of the existing graphene film preparation methods must be addressed in the future.
He, L., Liu, R., Hu, K. et al. Recent Progress on Graphene Flexible Photodetectors. Materials 2022. https://www.mdpi.com/1996-1944/15/14/4820
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Samudrapom Dam is a freelance scientific and business writer based in Kolkata, India. He has been writing articles related to business and scientific topics for more than one and a half years. He has extensive experience in writing about advanced technologies, information technology, machinery, metals and metal products, clean technologies, finance and banking, automotive, household products, and the aerospace industry. He is passionate about the latest developments in advanced technologies, the ways these developments can be implemented in a real-world situation, and how these developments can positively impact common people.
Please use one of the following formats to cite this article in your essay, paper or report:
Dam, Samudrapom. (2022, July 13). Researchers Discuss Graphene Flexible Photodetectors. AZoM. Retrieved on July 15, 2022 from https://www.azom.com/news.aspx?newsID=59546.
Dam, Samudrapom. "Researchers Discuss Graphene Flexible Photodetectors". AZoM. 15 July 2022. <https://www.azom.com/news.aspx?newsID=59546>.
Dam, Samudrapom. "Researchers Discuss Graphene Flexible Photodetectors". AZoM. https://www.azom.com/news.aspx?newsID=59546. (accessed July 15, 2022).
Dam, Samudrapom. 2022. Researchers Discuss Graphene Flexible Photodetectors. AZoM, viewed 15 July 2022, https://www.azom.com/news.aspx?newsID=59546.
Do you have a review, update or anything you would like to add to this news story?
At the Advanced Materials Show in June 2022, AZoM spoke with Ben Melrose from International Syalons about the advanced materials market, Industry 4.0, and efforts to move toward net-zero.
At the Advanced Materials Show, AZoM spoke with Vig Sherrill from General Graphene about the future of graphene and how their novel production technique will lower costs to open up a whole new world of applications in the future.
In this interview, AZoM speaks with Dr. Ralf Dupont, President of Levicron, about the potential of the new (U) ASD-H25 motor spindle for semicon industries.
Discover the OTT Parsivel², a laser disdrometer that can be used to measure all precipitation types. It allows users to collect data on the size and speed of falling particles.
Environics offers stand alone permeation systems that can be used for single or multiple disposable permeation tubes.
Grabner Instruments’ MiniFlash FPA Vision Autosampler is a 12-position autosampler. It is an automated accessory designed to be used with the MINIFLASH FP Vision Analyzer.
This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.
Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.
Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022